Updating dmi pool data lesotho dating site

As per advice I found on Google, I tried reverting to factory default settings in the BIOS.

This yielded Update Success after ``Verifying DMI Pool Data,`` but it still hangs. My Ubuntu Live environment detects all the hard drives.

I can see the contents of all my partitions, so I think I can safely rule out that it`s a faulty hard disk. Try booting into a live cd and running memtest86 or run "sudo dmidecode --type memory" from a terminal I had an identical problem to that plus when I could boot to a livecd it would say "dmi-table-broken-stop" in the hostname turned out to be bad ram "1Gb of PNY DDR2 Ram" [email protected]:~$ sudo dmidecode --type memory # dmidecode 2.11 SMBIOS 2.4 present.

Handle 0x0005, DMI type 5, 24 bytes Memory Controller Information Error Detecting Method: 8-bit Parity Error Correcting Capabilities: None Supported Interleave: One-way Interleave Current Interleave: One-way Interleave Maximum Memory Module Size: 1024 MB Maximum Total Memory Size: 4096 MB Supported Speeds: Other Supported Memory Types: Other Memory Module Voltage: 5.0 V Associated Memory Slots: 4 0x0006 0x0007 0x0008 0x0009 Enabled Error Correcting Capabilities: None Handle 0x0006, DMI type 6, 12 bytes Memory Module Information Socket Designation: A0 Bank Connections: 1 Current Speed: Unknown Type: Other Installed Size: 4096 MB (Single-bank Connection) Enabled Size: 4096 MB (Single-bank Connection) Error Status: OK Handle 0x0007, DMI type 6, 12 bytes Memory Module Information Socket Designation: A1 Bank Connections: 2 Current Speed: Unknown Type: Other Installed Size: 4096 MB (Single-bank Connection) Enabled Size: 4096 MB (Single-bank Connection) Error Status: OK Handle 0x0008, DMI type 6, 12 bytes Memory Module Information Socket Designation: A2 Bank Connections: 3 Current Speed: Unknown Type: Other Installed Size: 4096 MB (Single-bank Connection) Enabled Size: 4096 MB (Single-bank Connection) Error Status: OK Handle 0x0009, DMI type 6, 12 bytes Memory Module Information Socket Designation: A3 Bank Connections: 4 Current Speed: Unknown Type: Other Installed Size: 4096 MB (Single-bank Connection) Enabled Size: 4096 MB (Single-bank Connection) Error Status: OK Handle 0x001C, DMI type 16, 15 bytes Physical Memory Array Location: System Board Or Motherboard Use: System Memory Error Correction Type: None Maximum Capacity: 32 GB Error Information Handle: Not Provided Number Of Devices: 4 Handle 0x001D, DMI type 17, 27 bytes Memory Device Array Handle: 0x001C Error Information Handle: Not Provided Total Width: 2304 bits Data Width: 2244 bits Size: 4096 MB Form Factor: DIMM Set: None Locator: A0 Bank Locator: Bank0/1 Type: Unknown Type Detail: None Speed: 400 MHz Manufacturer: Serial Number: Asset Tag: Part Number: Handle 0x001E, DMI type 17, 27 bytes Memory Device Array Handle: 0x001C Error Information Handle: Not Provided Total Width: 2304 bits Data Width: 2244 bits Size: 4096 MB Form Factor: DIMM Set: None Locator: A1 Bank Locator: Bank2/3 Type: Unknown Type Detail: None Speed: 400 MHz Manufacturer: Serial Number: Asset Tag: Part Number: Handle 0x001F, DMI type 17, 27 bytes Memory Device Array Handle: 0x001C Error Information Handle: Not Provided Total Width: 2304 bits Data Width: 2244 bits Size: 4096 MB Form Factor: DIMM Set: None Locator: A2 Bank Locator: Bank4/5 Type: Unknown Type Detail: None Speed: 400 MHz Manufacturer: Serial Number: Asset Tag: Part Number: Handle 0x0020, DMI type 17, 27 bytes Memory Device Array Handle: 0x001C Error Information Handle: Not Provided Total Width: 2304 bits Data Width: 2244 bits Size: 4096 MB Form Factor: DIMM Set: None Locator: A3 Bank Locator: Bank6/7 Type: Unknown Type Detail: None Speed: 400 MHz Manufacturer: Serial Number: Asset Tag: Part Number: [email protected]:~$ My problem is that I can't get to my Grub2 bootloader because it hangs at DMI Pool.

From your last post it seems that the BIOS does not actually hang, but is probably waiting for something (which is different of 'hang' state) or has done its job but the subsequent process (loading OS maybe? Some BIOS programs (even on some modern boards) are so stupid that they don't even try to boot from other available media if you have not included it in its boot sequence and in correct order.

I cant recall exactly what it was that nudged me towards the conclusion that it was my two mass storage USB sticks plugged into my PC.

I have my boot priority in my BIOS set to USB-HDD, CD Drive and then hard disk.

bathroom-blowjob

bathroom-blowjob

My BIOS was probably looking for an O/S on those two storage USB sticks and it couldnt find any.I removed my USB sticks which eliminated that error message.I was running Ubuntu with an uptime for some two weeks or so.After downloading Black Mesa Source today, I attempted to boot into Windows 7 to install the recently released mod but I got an error message before Grub2 loaded. I then booted my Ubuntu Live disc and Googled the error message.

However, I then encountered different unusual behaviour. Google tells me that the source of problems similar to mine involve hardware and not software.Since I don't even get to Grub2 boot loader, it can`t be a problem with Ubuntu or Windows.

english-premier-league.ru

34 Comments

Leave a Reply

Your email address will not be published. Required fields are marked *

You may use these HTML tags and attributes: <a href="" title=""> <abbr title=""> <acronym title=""> <b> <blockquote cite=""> <cite> <code> <del datetime=""> <em> <i> <q cite=""> <strike> <strong>